Follow @MoreJoyIsPossible on FACEBOOK ↗ & INSTAGRAM ↗

Discover

How to dash dye

Dash-dyeing is the most playful way to bring color into your clothes. The dye comes in a spice jar with small holes, so you sprinkle it onto damp fabric like salt, mist it and watch your pattern appear. You don’t need tying, buckets or a dye bath, and there’s no way to do it wrong.

Grand Rapids, Michigan

Prism Of Us

Our Method

Not your usual tie-dye

#E6C746

Bottle dye

Dye mixed in water and squeezed on. The color stays true to one solid shade, the hex code you see here.

Marigold ice-dyed swatch

Ice dye

Powder melts slowly under ice and pools into soft, watercolor-like ranges of the shade. Swatch: Dharma Trading Co.

Marigold dash-dyed fabric

Dash dye

Activated powder sprinkled on wet fabric, then misted. It blooms and splits as it travels, so hidden colors burst out.

031 Marigold · #E6C746 · How to Dash Dye

No tyingNo soakingNo bucketsLess dye, less waterSee it as you make it

One dye, three ways. Liquid and ice dye both start with a dye bath or a long wait. Dash-dyeing puts the powder straight on damp fabric, so you see your pattern as you make it. Dharma Trading Co. sells the raw powder, and you can mix your own Procion MX and soda ash 50/50. What you get from me is that mix in a shaker jar with small holes, so the dye splits as it travels: less dye, less water, more vibrant patterns.

Step by Step

Five steps to your first piece

Dry pigment mixed with soda ash

Step One

Prepare your dye

Use my activated dyes as-is, or mix Procion MX powder and soda ash 50/50.

Clothing Ready To Dye at More Joy Studio

Step Two

Dampen your fabric

Wet it, wring it until damp, then scrunch, fold or lay it flat.

Clothing being dash-dyed

Step Three

Dash your colors

Sprinkle, flick or tap the powder on, then mist so it travels and splits.

Colors being set for dash-dyeing

Step Four

Let it set

Bag it somewhere warm for 4 hours or more, or steam it for a minute.

More Joy, How To Dash Dye at More Joy Studio

Step Five

Rinse & wash

Rinse cold until mostly clear, then wash warm, alone at first.

The details, step by step
  1. Use my activated dyes as-is, or make your own by mixing Procion MX powder and soda ash 50/50.
  2. Dampen your piece with plain water, then wring it out until it’s damp but not dripping. Scrunch it, fold it, or lay it flat. Each way gives a different pattern.
  3. Sprinkle, flick or tap the powder onto the damp fabric. Stack it for deep color, blow it for a spray or scatter it in a burst. Start light, because you can always add more. Then mist with soda ash and water so the pigment travels and each particle does its thing. Blended colors split as they move. Watch and decide: more red here, a little purple there, or stop.
  4. Bag or wrap your piece and leave it somewhere warm (at least 70°F/21 °C) for 4 hours or more. Overnight gives richer color. Short on time? Steam it in a pressure cooker at 5 PSI for 1 minute. Use a cooker you’ll keep only for dyeing.
  5. Rinse in cold water until it runs mostly clear, then wash warm with mild detergent. Wash it alone or with similar colors the first few times.

Safety Tips

How to dye safely

  • Wear a dust mask whenever you handle dry powder. If you dye often or you’re pregnant, upgrade to a proper respirator with the right filters.
  • Wear gloves. Dye stains skin, and soda ash can irritate it.
  • Protect your eyes. If dye gets in them, flush with water right away, and seek medical care if irritation continues.
  • Work somewhere well ventilated and easy to wipe down.
  • Clean as you go. Wipe up spilled powder with a damp cloth so it doesn’t become airborne.

The Science

Why it works

Dash-dyeing uses fiber-reactive dye, which forms a permanent chemical bond with plant fibers. Soda ash raises the pH, and that’s what triggers the bond. A little water is all it takes to start the reaction, so you don’t need to pre-soak. Polyester and other synthetics have nothing for the dye to bond to, so they stay their original color.

Making your own soda ash: bake baking soda on a sheet pan for an hour at 400°F to turn it into sodium carbonate.

Make Something at Home